HERITAGE & LISTED BUILDINGS
'Conservation is the process of maintaining and managing change to a heritage asset in a way that sustains and where appropriate enhances its significance' - English Heritage
Heritage and Listed buildings behave differently to their modern equivalent. With single skin walls and softer permeable fabric, older buildings are, by their very nature, breathable and allow for water to pass through the structure. In comparison, modern cavity walls and impermeable cements are a barrier to rainwater.
A classic metaphor for this, is the difference between a duffle coat and a raincoat. Both will keep you dry, but they do this in different ways. One gets wet and allows moisture to naturally evaporate back into the atmosphere, the other is impermeable and prevents water ingress and is also non-breathable.
With over 6 million traditional buildings and over 500,000 listed monuments in the UK, there is a considerable need for building professionals to understand the nature and practicalities of conservation.
At Blackacre we have extensive background learning, qualifications and experience to ensure we are able to respect and understand our traditional buildings so we can specify the best and most sympathetic repairs to maintain and even enhance their significance.
What we do
- Listed Building Surveys (pre-purchase)
- Interim Condition Surveys
- Building Pathology Consultancy
- Timber & Damp Surveys
- Repair Schedules (Scope of Works)
- Project Management
Buying a Listed building
Any heritage building has a certain romantic charm, often described as ‘character’ and is a different experience to living in a ‘normal’ house. Many people are unwilling to deal with the imperfections that typically come with older houses, such as sloping floors, low ceilings and draughty windows. Although if you are a period property person, they can be an exciting and highly rewarding venture.
Due to the nature of a Listed building, many elements and materials of the property are centuries old and have experienced wear and general living over time. This itself, does not mean an element is defective and you should expect this type of condition when buying a Listed building.
Listed building legislation
When purchasing a Listed building you are buying something with ‘special architectural interest’ and although you may own the property, it could be argued that you are effectively just a custodian of the building for your period of occupation. Careful considerations need to be made before jumping into a Listed building purchase, as these come with certain responsibilities and restrictions.
Although there is no direct legal obligation on an owner of a Listed building to carry out repairs, local and central government can force repairs to be carried out using an ‘urgent works notice’, necessary for its preservation. If the works are not carried out by the owner, the authority has the power to enter the property, carry out the works and seek to recover the costs from the owner.
If you want to carry out any alterations which may impact on the character or appearance of the building (internally or externally) you will need to get Listed Building Consent, otherwise it is a criminal offence to do this type of work. This can involve anything from knocking through an internal partition wall, removing a chimney breast, or even changing new uPVC windows for traditional timber ones.
Alteration or repair?
Consent is not normally required for repairs (providing they are like-for-like) to a Listed building, however a clear distinction between whether the work is an alteration or a repair must be established. We advise always talking to the local Conservation Officer and talking through proposed works with them.
Examples of alteration works that would require Listed Building Consent would be: repointing walls in modern cement; replacement of windows; rendering the external walls with modern cement render or removing old lime renders.
Past repair liability
Unfortunately, there are many surveyors, architects and builders that are not trained in conservation and don’t understand heritage buildings, how they work and the need for specific repairs to maintain the integrity of their fabric.
Too often we see beautiful Listed properties that have been damaged by quick repairs using modern, non-porous materials. This does mean that in some instances some previous repairs will need to be carefully removed to sustain integrity of the property and its elements. One such example of poor repairs, is the use of modern cement to re-point older, softer brickwork, which can cause ‘spalling’ to the brick face.
This means some purchases of Listed buildings can come with a considerable liability to put things right, and you should get a specialist building surveyor to report on the condition of the property and its potential liabilities.
Up until about the 1920's lime mortar was generally used for a range of applications in construction of houses such as laying masonry, external render and internal plaster. For solid brickwork structures with a single leaf, this was beneficial as it was soft and was porous, allowing the structure to breathe. Walls would get wet and the soft lime mortar would act as a channel for water to evaporate freely. This in turn can cause damage to the mortar, slowly degrading it over time, which is why it is sometimes referred to as being 'sacrificial'.
Now, with cavity wall construction modern cement is used which is non-porous and non-breathable. This allows for rainwater to be repelled from the wall surface (like the raincoat example, as explained in the About section above).
This works for modern construction, however too often we see cement repairs on old solid walled buildings that require lime mortar. This means that the channel of water evaporation is directed through the brickwork, causing damage and the need for repairs.
Lime Putty & Natural Hydraulic Lime (NHL)
The manufacture of lime was undertaken using a kiln, which would heat Calcium Carbonate (limestone or chalk) to around 900 degrees to omit Carbon Dioxide and produce Calcium Oxide (quicklime). Once mixed with water (slaked) this would produce a lime putty that could be mixed with an appropriate sand for pointing.
There are various types of lime mortar, lime putty, natural Hydraulic Lime (NHL) 2, 3.5 and 5, which can be used and varying degrees of hardness suitable for different wall materials and uses.
Timber Frame Buildings
A completely different mindset is required when surveying a timber frame building. These types of structure transfer their load down to the ground via timber 'skeleton' and require breathability and movement over time, often giving the distorted look we associate with old timber buildings.
Too often we find beautiful timber frame buildings that have been standing, living and breathing for centuries, but now are being damaged by incorrect materials, repairs or neglect. If correctly maintained there is no reason why these structures cannot continue standing for centuries more.
The common issue we find on our timber frame building surveys, is damp and the problems it brings. Whether it be high ground levels, exterior plastic paint or modern infill panels and renders, there can be many reasons for excessive moisture, which can then cause rotting or wood boring beetle.
Typically, the original infill panels will have been either removed or rendered over using modern non-breathable materials such as a cement render. Older building fabric needs to be treated as delicate, and the newer, harder materials of today have the effect of locking in moisture into timber, causing it to accumulate and degrade.
Another common issue we find is rotten sole plates, due to high ground levels or poor maintenance to rainwater goods. The sole plate is a critical element of the structure and distributes the point load from the post uprights, to a plinth below, usually of stone or brick. A full investigation of the mortise and tenon joints between the sole plate and post is important as these can trap moisture and these will have to be remade to maintain structural integrity.